ACCESS VERIFIED // SYSTEMS NOMINAL // PAYLOAD ARMED // LAUNCH SEQUENCE READY
ALL SYSTEMS GO! Ready to work right out the box!
NO OTHER PURCHASE NEEDED.
Fenix E12 V3.0 200 Lumens AA EDC Flashlight
Quick answer: the Fenix E12 V3.0 is a 3.21-inch AA flashlight putting out up to 200 lumens / 78m beam distance from one standard AA battery (included), with a metal tail switch, a magnetic tail, a two-way clip, and an IP68 rating.
Fenix E12 V3.0 AA EDC Flashlight – 200 Lumens
No charging cable, no special cells: the Fenix E12 V3.0 runs on a single AA battery you can buy anywhere. At 3.21" long and 1.9 oz with the battery, it puts out up to 200 lumens and runs up to 100 hours on Low, so it's an easy pick for a pocket, a glovebox, or the junk drawer.
Features
- 200-lumen High – 78 m (256 ft) beam from a Luminus SST20 LED
- 3 output levels – Low, Med, High, with memory that returns to the last level used
- Metal tail switch – full press for on/off, tap to change level
- Magnetic tail – sticks to steel for hands-free work
- Two-way body clip + tail-stand – clip it to a pocket or a hat brim
- IP68 rated – dustproof and submersible
- A6061-T6 aluminum body – HAIII hard-anodized, 1 m impact resistance (Fenix also drop-tests it from 1.5 m)
Battery
- Runs on 1 × AA – alkaline (one included) or Ni-MH rechargeable recommended; 1.5 V lithium AA also works
- Up to 100 hours on Low
- Mechanical tail switch – no standby drain while it's off
- Fit check: use 1.2–1.5 V AA cells only. Fenix does not list 3.7 V 14500 Li-ion cells as compatible.
Specifications
| Specification | Details |
|---|---|
| LED | Luminus SST20 |
| Maximum Brightness | 200 lumens |
| Peak Beam Distance | 256 ft (78 m) |
| Peak Beam Intensity | 1,533 cd |
| Battery | 1 × AA (alkaline included) |
| Max Runtime | 100 hours |
| IP Rating | IP68 |
| Impact Resistance | 1 meter |
| Dimensions | 3.21" × 0.76" × 0.69" (81.5 × 19.3 × 17.4 mm) |
| Weight | 1.90 oz (53.9 g) with battery |
| Body Material | A6061-T6 aluminum |
| Finish | HAIII hard-anodized |
Brightness & Runtime
| Mode | Output | Runtime | Distance |
|---|---|---|---|
| High | 200 lumens | 1 hour | 78 m |
| Med | 30 lumens | 15 hours | 30 m |
| Low | 5 lumens | 100 hours | 12 m |
ANSI/PLATO FL1 figures from Fenix, measured with an AA alkaline battery.
What's Included
- Fenix E12 V3.0 flashlight (body clip attached)
- AA alkaline battery
- Lanyard
- Spare O-ring
- User manual and warranty card
Great for: everyday carry, glovebox and emergency kits, power outages, under-hood work, dog walks, and anyone who would rather swap a battery than charge one.
Specs
| Max Output | 200 lm |
|---|---|
| Beam Distance | 78 m |
| Peak Intensity | 1533 cd |
| LED | Luminus SST20 |
| Battery Format | 1 × AA (alkaline or Ni-MH recommended; 1.5 V lithium AA usable) |
| Battery Included | Yes (AA alkaline) |
| Charging Port | None (replaceable AA battery) |
| IP Rating | IP68 |
| Impact Resistance | 1 m |
| Length | 81.5 mm |
| Head Diameter | 19.3 mm |
| Body Diameter | 17.4 mm |
| Weight (with cell) | 53.9 g |
| Material | A6061-T6 aluminum, HAIII hard-anodized finish |
| Switch | Metal tail switch (full press on/off, tap to change level) |
| Modes | 3 (Low 5 lm / Med 30 lm / High 200 lm) |
| Max Runtime | 100 h on Low (AA alkaline) |
| Mode Memory | Yes |
| Special Features | Magnetic tail; two-way body clip (pocket or hat brim); tail-stand capable; no standby drain |
Customer Reviews
cat qa.log
:: no questions yet — be the first to ask below
./ask
